Non-supporting rail for fixing decking, cladding and ceilings
- Non-supporting rail for fixing to a hard floor or continuous support
- Low thickness
- Industrially pre-clipped profile for perfect leakage lines
- Each blade can be dismantled individually using special spanners adapted to the width of the blade
- Rail can be cut to length
- No contact between the boards and the aluminium rail, for better air circulation
- Invisible fixing
- Simple, quick and easy to install
- Infinite possibilities of use
- 100% recyclable
Specifications
technical
This is a non-load-bearing track designed to be laid directly on the floor or screwed to a structure for raised installation. The finished heights possible with this type of structure are between 39 and 47mm.
Flat rails can also be used to fix external cladding, soffits, ceilings and internal cladding. It is the rail most commonly used for cladding. It can be used for surfaces up to 38 mm thick, including 20 mm boards. It is fixed directly to the surface to be covered.
Rail material
Aluminium 6060
Rail finish
Black paint
Clip material
Polyoxymethylene (POM)
Weight rails (with clips)
+/- 0,630kg/ml
Max. length
3968 mm
Tear strength of clip on rail
from 150 to 250 kg, for 2 fixing points (depending on the type of covering)
SUSTAINABLE
Designed for great strength, our rails retain their integrity for many years.
RECYCLE
Aluminium made from at least 80% recycled materials
MADE IN FRANCE
Our aluminium rails are assembled in our factory in Alsace.
Flat rail in pictures
Compatibility
Details
Board compatibility
FLAT RAIL - 124
32 clips for 16 boards of 120 mm
12 x 55 x 1984 mm. Non-bearing.
32 clips for 16 boards of 120 mm
12 x 55 x 1984 mm. Non-bearing.
Accoya®, Kebony®, Moso®, Thermo ash, Thermopin
FLAT RAIL - 124
24 clips for 12 boards of 120 mm
12 x 55 x 3968 mm. Non-bearing.
24 clips for 12 boards of 120 mm
12 x 55 x 3968 mm. Non-bearing.
Accoya®, Kebony®, Moso®, Thermo ash, Thermopin
FLAT RAIL - 145
24 clips for 13 boards of 140 mm
12 x 55 x 1885 mm. Non-bearing.
24 clips for 13 boards of 140 mm
12 x 55 x 1885 mm. Non-bearing.
UPM
FLAT RAIL - 150
26 clips for 13 boards of 145 mm
12 x 55 x 1950 mm. Non-bearing.
26 clips for 13 boards of 145 mm
12 x 55 x 1950 mm. Non-bearing.
Nekko
FLAT RAIL - 155,5
24 clips for 12 boards of 150 mm
12 x 55 x 1866 mm. Non-bearing.
24 clips for 12 boards of 150 mm
12 x 55 x 1866 mm. Non-bearing.
Dex
FLAT RAIL WITHOUT CLIPS
For angled segments
12 x 55 x 1984 mm. Non-bearing.
For angled segments
12 x 55 x 1984 mm. Non-bearing.
/
