OUR PRODUCTS
Decking
Decking
Our Grad® clip
The removable clip was created and patented in 2014. It is the very heart of the Grad® system, providing the link between the aluminium structure and the boards. Infinitely removable and repositionable, it’s a feat of engineering guaranteed for 20 years. Durable and resistant, it can be clipped onto any Grad® groove-equipped board, offering countless possibilities.
The removable clip was created and patented in 2014. It is the very heart of the Grad® system, providing the link between the aluminium structure and the boards. Infinitely removable and repositionable, it’s a feat of engineering guaranteed for 20 years. Durable and resistant, it can be clipped onto any Grad® groove-equipped board, offering countless possibilities.
Decking with Grad
FLAT RAIL
The Flat Rail is the concept thinnest rail. It is a non-carrying rail expected to be directly installed on the ground or to be screwedon a structure in case of an elevated installation. It is not compatible with the use of the Top Lift® stud.
PR24
The PR24 rail is a carrier rail allowing low height construction on studs. It is compatible with the use of the Top Lift® plot.
Rail height : 24 mm
PR39
The PR39 rail is th emost frequently used. It is a carrier rail that allows a lot of different heights. It can be directly installed on the floor or on plots. It is compatible with the use of the Top Lift® plot.
Rail height : 39 mm
PR56
The PR56 rail is used in case of important heights on plots. It is a carrier rail and it clips itself directly on top of the Top Lift® pedestals.
Rail height : 56 mm
Top Rail
The Top Rail is a PR24 rail with built-in Top Screw adjustement pads. It can only be installed on hard floors, for private projects. It can be used to raise the terrace while keeping a low height.
UR18
UR 18 is a rail that can be used to create angled segments and decking with rounded edges. Under certain special conditions, it can also be used for low-height stoneware decking. It is used on Top Lift® pedestals or can be laid directly on the ground. It is not compatible with Top Cube®. Rail height: 18 mm
UR33
UR 33 is a rail that can be used to create angled segments and decking with rounded edges. Under certain special conditions, it can also be used for low-height stoneware decking. It is used on Top Lift® pedestals or can be laid directly on the ground. It is not compatible with Top Cube®. Rail height : 33 mm
UR39
UR 39 is a multi-purpose rail with several uses. It can be used to create angled segments and decking with rounded edges. Fitted with support tiles and sound-dampening cushions, it can also be used to create stoneware decking. It is used on Top Lift® pedestals or can be laid directly on the ground. It is compatible with Top Cube® for installing skirting. Rail height : 39 mm
SCOTS RADIATA
GUARANTEE
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable. It is available in two finishes: natural and grey dyed in bulk (see Accoya® Grey). In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level). As it silvers over time, it retains a light shade, which makes it particularly suitable for pool surrounds.
Use class according to EN 335: 4
Durability class according to NF EN 350: 1
Guaranteed for 50 years*
*See sales warranty conditions
UPON INSTALLATION
6 MONTH
2 YEARS
PIN RADIATA
GUARANTEE
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable. It is available in two finishes: natural and grey dyed in bulk (in Accoya®). In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level).
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 50 years* *See sales warranty conditions
Sample request
UPON INSTALLATION
36 MONTHS
45 MONTHS
SCOTS RADIATA
GUARANTEE
Resulting from an innovative furfurylation process, Kebony® is made out of radiata pine which has been treated with a liquid additive made with plant-based ingredients This makes it very durable and highly stable. This variety has very few knots guaranteeing a flawless look. Over the months and depending on the conditions of exposure, it will take on a grey shade which will silver more and more to give your cladding an uncompromisingly modern look.
Use class according to EN 335: 4
Durability class according to NF EN 350: 1
Guaranteed for 30 years*
*See sales warranty conditions
UPON INSTALLATION
1 YEAR
2 YEARS
BAMBOU MOSO® X-TREME®
GUARANTEE
With its chocolate colour, MOSO® Bamboo X-treme® is refined, knot-free and has a visible grain. The MOSO® Bamboo X-treme® boards are made from bamboo slats that are heat-treated at 200°C and then compressed at a very high density. This two-stage process increases its hardness and stability for a durable outdoor installation.
Use class according to EN 335: 4
Durability class according to NF EN 350: 1
Guaranteed for 25 years*
*See sales warranty conditions
UPON INSTALLATION
6 MONTH
2 YEARS
MOSO® N-DURANCE®
BAMBOU MOSO® N-DURANCE®
GUARANTEE
With its caramel colour, MOSO® Bamboo N-durance® is refined, knot-free and has a visible grain. The MOSO® Bamboo N-durance® boards are made from bamboo slats that are heat-treated at 200°C and then compressed at a very density. This two-stage process increases its hardness and stability for a durable outdoor installation.
Use class according to EN 335 : 4 Durability class according to NF EN 350 : 1 Guaranted for 25 years* *See sales warranty conditions
Sample request
SCOTS RADIATA
GUARANTEE
Thermo Clear Pine is a honey-coloured wood made from the radiata pine. It has very rare knots that will give your cladding a warm and traditional look. The Thermo Clear Pine uses a thermal treatment which combines water vapour and heat in order to permanently modify the internal structure of the wood. Over time, a very beautiful and homogeneous silver patina will emerge.
Use class according to EN 335: 4
Durability class according to NF EN 350: 1
Guaranteed for 25 years*
*See sales warranty conditions
Partner
Thermory®
UPON INSTALLATION
6 MONTH
2 YEARS
ASH
GUARANTEE
Thermoash is a wood variety with very few knots, that is thermally modified at 215°C to increase its stability, durability and rot-proof. Over time with exposure to UV light it will develop a very beautiful silver patina.
Use class according to EN 335: 3
Durability class according to NF EN 350: 1
Guaranteed for 20 years*
*See sales warranty conditions
Partners
Thermory®, Listone Giordano®, Novawood®, LDC Wood®
UPON INSTALLATION
6 MONTHS
1 YEAR
GUARANTEE
Brown Nekko® is a composite containing approximately 50% wood fibres as well as plastic and other additives. As a result of the co-extrusion production process, it has an outer layer that surrounds the core, which improves its durability and texture. This can be used to achieve wonderful shades and beautiful graining for effectively replicating wood. This is a top-of-the-range product in the composites market, possessing very good resistance to stains, including food stains, as well as to slipping. It is available in two finishes: brown and grey (see Nekko® grey)
Guaranteed for 15 years*
*See sales warranty conditions
UPON INSTALLATION
6 MONTHS
2 YEARS
GUARANTEE
The Nekko® is a composite containing approximately 50% wood fibres as well as plastic and other additives. As a result of the co-extrusion production process, it has an outer layer that surrounds the core, which improves its durability and texture. This can be used to achieve wonderful shades and beautiful graining for effectively replicating wood. It is a top-of-the-range product in the composites market, possessing very good resistance to stains, including food stains, as well as to slipping. It is available in two finishes: brown and grey (see Nekko® brown)
Guaranteed for 15 years*
*See sales warranty conditions
UPON INSTALLATION
6 MONTHS
2 YEARS
DEX® WAL
GUARANTEE
The DEX® Wal porcelain stoneware board is glued to an extruded PVC mount. It has a metal frame that makes it sturdier. Thanks to its ceramic finish, the DEX® Wal decking board is a very good product to preventing dirt, and it has non-slip properties. It has a grooved mount for fitting it to the Grad® system.
Guaranteed for 2 years*
*See sales warranty conditions
DEX® HAZEL
GUARANTEE
The DEX® Hazel porcelain stoneware board is glued to an extruded PVC mount. It has a metal frame that makes it sturdier. Thanks to its ceramic finish, the DEX® Hazel decking board is a very good product to preventing dirt, and it has non-slip properties. It has a grooved mount for fitting it to the Grad® system.
Guaranteed for 2 years*
*See sales warranty conditions
A unique polypropylene pedestal which guarantees a perfectly flat structure. The Top Lift® pedestal can be used on waterproof membranes in order to protect them from sinking. It has the same function on naturally stable ground and is therefore especially suitable for stabilised surfaces (packed gravel) or on hard floors (concrete, tiles). Its very precise and easy-to-use nut makes it easy to level your decking. The pedestal is adjustable from 35 to 325 mm with the help of the UP+ risers and the TOP+ stiffeners. A slope corrector may be added to the pedestal to offset slopes with an incline of up to 4%.
Mounting bracket for finishing strip sections. This element is placed on the side of the load-bearing rail to take the wood or aluminium finishing strips and create a flawless look. Featuring an integrated Top Screw adjustment pad, it can be perfectly adjusted to the required decking height. In the case of a porcelain stoneware patio, it is also possible to stack several Top Cubes® in order to reach the required height. It is compatible with the PR 39, PR 56 and Stone Rail.
Available in wood and aluminium
In keeping with our decking innovations, our services have developed a system for fitting wooden strips. Thanks to the Top Cube® injected into our workshops, it is possible to fit the PR39 and PR56 rails with a mount for strips with up to 3 slats in height. The peripheral finishes then become faster and the fitter obtains a perfect result.
If there is contact with the earth, fitting wooden strips is not durable. In order to respond to these configurations, we developed an extruded aluminium strip that can be used with the Top Cubes®. Once positioned on these elements, you will get a perfect durable finish with designer looks.
Connector between two rails to ensure the correct spacing (centre-to-centre distance) between
the different elements (rails, clips, boards).
Aluminium section used to position the rails. It is pre-equipped with clips to create a perfect alignment. The spreaders can be used with systems that combine load-bearing rails (PR24, PR39 and PR56) with Top Lift® pedestals.
The Clip Grip prevents the board from moving lengthwise using teeth that penetrate the wood. In this way, they will stay straight and aligned. The Clip Grip must be used for every type of wooden boards to prevent slipping. It is compatible with all the rails.
Steel dismantling keys for dismantling (unclipping) the boards from the rail. Used in pairs, simply slide the keys between the rail and the clips to take the elements apart. This way, a board, that has been damaged for example, can be quickly and easily replaced without interrupting the functioning of the system.
Rails
The Flat Rail is the concept thinnest rail. It is a non-carrying rail expected to be directly installed on the ground or to be screwedon a structure in case of an elevated installation. It is not compatible with the use of the Top Lift® stud.
The PR24 rail is a carrier rail allowing low height construction on studs. It is compatible with the use of the Top Lift® plot.
Rail height : 24 mm
The PR39 rail is th emost frequently used. It is a carrier rail that allows a lot of different heights. It can be directly installed on the floor or on plots. It is compatible with the use of the Top Lift® plot.
Rail height : 39 mm
The PR56 rail is used in case of important heights on plots. It is a carrier rail and it clips itself directly on top of the Top Lift® pedestals.
Rail height : 56 mm
The Top Rail is a PR24 rail with built-in Top Screw adjustement pads. It can only be installed on hard floors, for private projects. It can be used to raise the terrace while keeping a low height.
UPON INSTALLATION
6 MONTH
2 YEARS
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable. It is available in two finishes: natural and grey dyed in bulk (see Accoya® Grey). In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level). As it silvers over time, it retains a light shade, which makes it particularly suitable for pool surrounds.
Use class according to EN 335 : 4 Durability class according to NF EN 350 : 1 Guaranteed for 50 years* *See sales warranty conditions
Sample request
SCOTS RADIATA
WARRANTY
UPON INSTALLATION
36 MONTHS
45 MONTHS
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable. It is available in two finishes: natural and grey dyed in bulk (in Accoya®). In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level).
Use class according to EN 335 : 4 Durability class according to NF EN 350 : 1 Guaranteed for 50 years* *See sales warranty conditions
Sample request
SCOTS RADIATA
WARRANTY
À LA POSE
1 AN
2 ANS
Fruit d’un traitement innovant par furfurylation, le Kebony® est produit à partir de pin radiata qui a été traité avec un additif liquide issu de composants végétaux. Ceci lui confère une importante durabilité et une grande stabilité. Cette essence présente de très rares nœuds pour vous garantir un esthétisme irréprochable. Au fil des mois, il prendra une teinte grise qui s’éclaircira de plus en plus pour donner un aspect résolument moderne à votre terrasse.
Classe d’usage selon EN 335 : 4
Classe de durabilité selon NF EN 350 : 1
Garanti jusqu’à 30 ans*
*Voir conditions de garanties commerciales
PIN
RADIATA
GARANTIE
À LA POSE
6 MOIS
2 ANS
Avec sa teinte chocolat, le MOSO® Bamboo X-treme® est élégant, sans nœuds et avec un veinage apparent. Les lames de MOSO® Bamboo X-treme® sont fabriquées à partir de lamelles en bambou thermo-traitées à 200°C qui sont ensuite compressées à très haute densité. Ce double traitement augmente sa dureté et sa stabilité et permet ainsi une installation en extérieur durable.
Classe d’usage selon EN 335 : 4
Classe de durabilité selon NF EN 350 : 1
Garanti jusqu’à 25 ans*
*Voir conditions de garanties commerciales
BAMBOU MOSO® X-TREME®
GARANTIE
Avec sa teinte chocolat, le MOSO® Bamboo X-treme® est élégant, sans nœuds et avec un veinage apparent. Les lames de MOSO® Bamboo X-treme® sont fabriquées à partir de lamelles en bambou thermo-traitées à 200°C qui sont ensuite compressées à très haute densité. Ce double traitement augmente sa dureté et sa stabilité et permet ainsi une installation en extérieur durable.
Classe d’usage selon EN 335 : 4
Classe de durabilité selon NF EN 350 : 1
Garanti jusqu’à 25 ans*
*Voir conditions de garanties commerciales
BAMBOU MOSO® X-TREME®
GARANTIE
À LA POSE
6 MOIS
1 AN
Le Thermopin est un bois tendre de couleur miel issu du pin sylvestre. Il possède quelques nœuds qui donneront un aspect chaleureux et traditionnel à votre terrasse. Le Thermopin est modifié thermiquement à 215°C afin d’accroître sa stabilité, durabilité et le rendant imputrescible. Avec le temps, une très belle patine argentée et homogène apparaîtra.
Classe d’usage selon EN 335 : 3
Classe de durabilité selon NF EN 350 : 2
Garanti jusqu’à 15 ans*
*Voir conditions de garanties commerciales
Partenaires
Thermory®, Tantimber
PIN
SILVESTRE
GARANTIE
À LA POSE
6 MOIS
1 AN
Le Thermofrêne est un bois avec de très rares nœuds, modifié thermiquement à 215°C pour augmenter sa stabilité, durabilité et le rendant imputrescible. Avec le temps et l’exposition aux UV, il arborera une très belle patine argentée.
Classe d’usage selon EN 335 : 3
Classe de durabilité selon NF EN 350 : 1
Garanti jusqu’à 20 ans*
*Voir conditions de garanties commerciales
Partenaires
Thermory®, Listone Giordano®, Novawood®, LDC Wood®
FRÊNE
GARANTIE
À LA POSE
6 MOIS
2 ANS
Le Nekko® brun est un composite composé à environ 50% de fibres de bois ainsi que de plastique et autres additifs. Produit par co-extrusion, il possède ainsi une couche externe enveloppant son cœur, ce qui améliore sa durabilité et sa texture. Ceci permet de réaliser de magnifiques nuances et un très joli veinage pour une imitation optimale du bois. Il s’agit du haut de gamme dans le marché des composites, possédant une très bonne résistance aux tâches mêmes alimentaires, ainsi qu’à la glissance. Il est disponible en deux finitions : brun et gris (voir Nekko® gris)
Garanti jusqu’à 15 ans*
*Voir conditions de garanties commerciales
GARANTIE
À LA POSE
6 MOIS
2 ANS
Le Nekko® gris est un composite composé à environ 50% de fibres de bois ainsi que de plastique et autres additifs. Produit par co-extrusion, il possède ainsi une couche externe enveloppant son cœur, ce qui améliore sa durabilité et sa texture. Ceci permet de réaliser de magnifiques nuances et un très joli veinage pour une imitation optimale du bois. Il s’agit du haut de gamme dans le marché des composites, possédant une très bonne résistance aux tâches mêmes alimentaires, ainsi qu’à la glissance. Il est disponible en deux finitions : brun et gris (voir Nekko® brun)
Garanti jusqu’à 15 ans*
*Voir conditions de garanties commerciales
GARANTIE
La lame en grès cérame DEX® Wal est collée sur un support en PVC extrudé. Elle bénéficie d’une armature métallique la rendant plus résistante. Grâce à sa finition en céramique, la lame de terrasse DEX® Wal est un très bon produit pour éviter les salissures et possède un pouvoir antidérapant. Elle est dotée d’un support rainuré pour s’adapter au système Grad®.
Garanti jusqu’à 2 ans*
*Voir conditions de garanties commerciales
GARANTIE
La lame en grès cérame DEX® Hazel est collée sur un support en PVC extrudé. Elle bénéficie d’une armature métallique la rendant plus résistante. Grâce à sa finition en céramique, la lame de terrasse DEX® Hazel est un très bon produit pour éviter les salissures et possède un pouvoir antidérapant. Elle est dotée d’un support rainuré pour s’adapter au système Grad®.
Garanti jusqu’à 2 ans*
*Voir conditions de garanties commerciales
GARANTIE
A unique polypropylene pedestal which guarantees a perfectly flat structure.
The Top Lift® pedestal can be used
on waterproof membranes in order to protect them from sinking. It has the same
function
on naturally stable ground and is therefore especially suitable for stabilised surfaces (packed gravel)
or on hard
floors (concrete, tiles). Its very precise and easy-to-use nut makes it easy to
level your
decking. The pedestal
is adjustable from 35 to 325 mm with the help of the UP+ risers and the
TOP+ stiffeners. A slope
corrector may be
added to the pedestal to offset slopes with an
incline of up to 4%.
Mounting bracket for finishing strip sections. This element is placed on the side
of the load-bearing rail
to take the wood or aluminium finishing strips and create a flawless
look. Featuring an integrated Top Screw adjustment pad, it
it can be perfectly adjusted
to the required decking height. In the case of a porcelain stoneware patio, it is also possible
to stack several Top Cubes®
in order to reach the required height. It is compatible with the PR 39,
PR 56 and Stone Rail.
Available in wood and aluminium
In keeping with our decking innovations, our services have developed a system
for fitting
wooden strips. Thanks to the Top Cube® injected into our workshops, it is possible
to fit the PR39 and PR56 rails with a mount for strips with up to 3 slats in height.
The peripheral finishes then become faster and the fitter obtains a perfect result.
If there is contact with the earth, fitting wooden strips is not durable. In order to respond
to these configurations, we developed an extruded aluminium strip that can be used
with the Top Cubes®. Once positioned on these elements, you will get a perfect durable
finish with designer looks.
Connector between two rails to ensure the correct spacing (centre-to-centre distance) between the different elements (rails, clips, boards).
Aluminium section used to position the rails. It is pre-equipped with clips to
create a perfect
alignment.
The spreaders can be used with systems that combine load-bearing rails (PR24, PR39 and PR56)
with Top Lift® pedestals.
The Clip Grip prevents the board from moving lengthwise using teeth that
penetrate the wood. In this way, they will stay straight and aligned.
The Clip Grip must be used
for every type of wooden boards to prevent slipping.
It is compatible with all the rails.
Steel dismantling keys for dismantling (unclipping) the boards from the rail.
Used
in pairs, simply slide the keys between the rail and the clips
to take the elements apart.
This way, a board, that has been damaged for example,
can be quickly and easily replaced
without interrupting the functioning of the system.
OUR DECKING PROJECTS
