OUR PRODUCTS
Cladding
OUR PRODUCTS
Cladding
Our Grad® clip
The removable clip was created and patented in 2014. It is the very heart of the Grad® system, providing the link between the aluminium structure and the boards. Infinitely removable and repositionable, it’s a feat of engineering guaranteed for 20 years. Durable and resistant, it can be clipped onto any Grad® groove-equipped board, offering countless possibilities.
Cladding with Grad
The Silva S range designates narrow slats whose recommended installation direction is horizontal. These profiles are machined at an angle to encourage water flow. Several species and widths are available.
The Anta S range designates narrow planks whose recommended direction of installation is vertical. These profiles are planed with straight edges. Several woods and widths are available.
The Varibo range includes the 3 MOSO® X-treme® profiles whose recommended direction is vertical. These profiles are planed with straight edges. Thanks to the dedicated rail, which allows different widths to be combined according to rhythm Varibo, it’s possible to create a unique facade design.
Thanks to the Anta S Thermopin range, it is also possible to vary thicknesses. By combining the 2 profiles, you can give character to your façade.
FLAT RAIL
The Flat rail can be used for fixing exterior cladding, soffits, ceilings and interior facings. It is the most commonly used rail for cladding. It can be used to create 38 mm thick surfaces that include a 20 mm board. It is fastened directly to the surface to be covered.
MINI RAIL
The Mini Rail, which is non-load bearing, is designed for fastening cladding or ceiling sections. It is the lightest and thinnest rail in our system. It can be used to create very thin surfaces: 32 mm including a 20 mm board. The Mini Rail can also be curved with a 500 mm radius for projects with curved surfaces.
START RAIL
The Start Rail is a simplified version of the Flat Rail and has been designed for projects without any particular constraints. It can be used for fixing cladding, soffit and ceiling sections. It can be used to create very thin surfaces; 38 mm including a 20 mm board.
PR24
The PR 24 is a structural rail that is suitable for fastening cladding, soffit and ceiling sections. This rail can be used to space out the fixings on facades. It is possible to create surfaces that include a 20 mm board. It is particularly suitable for projects on thin external insulation.
PR39
The PR 39 is a structural rail that is suitable for fastening cladding, soffit and ceiling sections. This rail can be used to space out the fixings on facades, for projects with specific technical and environmental constraints. It is for creating 65 mm thick surfaces that include a 20 mm board. It is particularly suitable for external insulation projects or projects with specific technical features.
SCOTS RADIATA
GUARANTEE
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable. It is available in two finishes: natural and grey dyed in bulk (see Accoya® Grey). In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level). As it silvers over time, it retains a light shade, which makes it particularly suitable for pool surrounds.
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 50 years* *See sales warranty conditions
Sample request
UPON INSTALLATION
6 MONTH
2 YEARS
PIN RADIATA
GUARANTEE
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable. It is available in two finishes: natural and grey dyed in bulk (in Accoya®). In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level).
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 50 years* *See sales warranty conditions
Sample request
UPON INSTALLATION
36 MONTHS
45 MONTHS
ACCOYA® MARUGAME
SCOTS
GUARANTEE
The Accoya® Marugame is a special finish that is in keeping with the Japanese Shou Sugi Ban movement. Also known as Yakisugi, this is a wood burning technique which involves treating the upper side of a board of wood by combustion in order to improve its durability. This technique, which is as old as time, has considerable advantages in terms of wood sustainability and maintenance. Carbonisation will indeed offer protection against wood mould or or oxygenation, that makes the wood durable over time. In addition, the carbonised layer will be more effective against reactions to flames and against insects. • Planed section with 30° edges in the SILVA S range • Planed section with square edges in the ANTA S range
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 50 years* *See sales warranty conditions
Sample request
SCOTS RADIATA
GUARANTEE
Resulting from an innovative furfurylation process, Kebony® is made out of radiata pine which has been treated with a liquid additive made with plant-based ingredients This makes it very durable and highly stable. This variety has very few knots guaranteeing a flawless look. Over the months and depending on the conditions of exposure, it will take on a grey shade which will silver more and more to give your cladding an uncompromisingly modern look. • Planed section with 30° edges in the SILVA S range • Planed section with square edges in the ANTA S range
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 30 years* *See sales warranty conditions
Sample request
UPON INSTALLATION
1 YEAR
2 YEARS
BAMBOU MOSO® X-TREME®
GUARANTEE
With its chocolate colour, MOSO® Bamboo X-treme® is refined, knot-free and has a visible grain. The MOSO® Bamboo X-treme® boards are made from bamboo slats that are heat-treated at 200°C and then compressed at a very high density. This two-stage process increases its hardness and stability for a durable outdoor installation.
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 25 years* *See sales warranty conditions
Sample request
UPON INSTALLATION
6 MONTH
2 YEARS
SCOTS RADIATA
GUARANTEE
Thermo Clear Pine is a honey-coloured wood made from the radiata pine. It has very rare knots that will give your cladding a warm and traditional look. The Thermo Clear Pine uses a thermal treatment which combines water vapour and heat in order to permanently modify the internal structure of the wood. Over time, a very beautiful and homogeneous silver patina will emerge. • Planed section with 30° edges in the SILVA S range • Planed section with square edges in the ANTA S range
Use class according to EN 335: 4 Durability class according to NF EN 350: 1 Guaranteed for 25 years* *See sales warranty conditions
Partner Thermory®
Sample request
UPON INSTALLATION
6 MONTH
2 YEARS
ASH
GUARANTEE
Thermoash is a wood variety with very few knots, that is thermally modified at 215°C to increase its stability, durability and rot-proof. Over time with exposure to UV light it will develop a very beautiful silver patina. • Planed section with 30° edges in the SILVA S range • Planed section with square edges in the ANTA S range
Use class according to EN 335: 3 Durability class according to NF EN 350: 1 Guaranteed for 20 years* *See sales warranty conditions
Partners Thermory®, Listone Giordano®, Novawood®, LDC Wood®
Sample request
UPON INSTALLATION
6 MONTHS
1 YEAR
SPRUCE
GUARANTEE
Thermospruce is a honey-coloured wood variety that has 2 to 6 knots per linear metre. It uses a heat treatment at 215°C which combines water vapour and heat in order to permanently modify the internal structure of the wood. The durability and stability of the material are greatly improved. It is available in two finishes: brown and grey. • Planed section with 30° edges in the SILVA S range • Planed section with square edges in the ANTA S range • Square section
Use class according to EN 335: 3 Durability class according to NF EN 350: 1 Guaranteed for 15 years* *See sales warranty conditions
Partner Thermory®
Sample request
UPON INSTALLATION
6 MONTHS
2 YEARS
ALUMINIUM
Aluminium has many advantages. It is a material that is extremely durable and stable material over time. It is also very lightweight and resistant to challenging environments. It comes in a number of impressive colour shades.
Sample request
Connector between two rails to ensure the correct spacing (centre-to-centre distance) between the different elements (rails, clips, boards).
The Clip Grip prevents the board from moving lengthwise using teeth that penetrate the wood. In this way, they will stay straight and aligned. The Clip Grip must be used for all types of wooden boards to prevent any slippage. It is compatible with all the rails.
Steel dismantling keys for dismantling (unclipping) the boards of the rail. Working in pairs, simply slide the keys between the rail and the clips to take the elements apart. This way, a board, that has been damaged for example, can be quickly and easily replaced without interrupting the functioning of the system.
Aluminium receiving part for fixing the finishing sections: drip edge and stop section.
Finishing section that eliminates runoff water.
Finishing section made of aluminium that is ideal for finishing the surrounds of the facade openings.
Aluminium bracket suitable for receiving corner finishing sections.
Easy to fit using the corner brackets, this aluminium section will provide a perfect and modern finish to the corners of the facade.
Type of Installation
The Silva S range designates narrow slats whose recommended installation direction is horizontal. These profiles are machined at an angle to encourage water flow. Several species and widths are available.
The Anta S range designates narrow planks whose recommended direction of installation is vertical. These profiles are planed with straight edges. Several woods and widths are available.
The Varibo range includes the 3 MOSO® X-treme® profiles whose recommended direction is vertical. These profiles are planed with straight edges. Thanks to the dedicated rail, which allows different widths to be combined according to rhythm Varibo, it’s possible to create a unique facade design.
Thanks to the Anta S Thermopin range, it is also possible to vary thicknesses. By combining the 2 profiles, you can give character to your façade.
The Flat rail can be used for fixing exterior cladding,
soffits, ceilings and interior facings. It is the most commonly
used rail for cladding. It can be used to create 38 mm thick
surfaces that include a 20 mm board.
It is fastened directly to the surface to be covered.
The Mini Rail, which is non-load bearing, is designed for fastening cladding
or ceiling sections. It is the lightest and thinnest rail in our system.
It can be used to create very thin surfaces: 32 mm
including a 20 mm board. The Mini Rail can also be curved
with a 500 mm radius for projects with curved surfaces.
The Start Rail is a simplified version of the Flat Rail and has been designed for projects
without any particular constraints.
It can be used for fixing
cladding, soffit and ceiling sections. It can be used to create very
thin surfaces; 38 mm including a 20 mm board.
The PR 24 is a structural rail that is suitable for fastening cladding, soffit
and ceiling sections. This rail can be used to space out the fixings on facades.
It is possible
to create surfaces that include
a 20 mm board. It is particularly suitable for projects
on thin external insulation.
The PR 39 is a structural rail that is suitable for fastening cladding, soffit
and ceiling sections. This rail can be used to space out the fixings on facades, for projects
with specific technical and environmental constraints.
It is for
creating 65 mm thick surfaces that include a 20 mm
board. It is particularly suitable for external insulation projects
or projects with specific technical features.
Cladding Boards
UPON INSTALLATION
6 MONTH
2 YEARS
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable.
It is available in two finishes: natural and grey dyed in bulk (see Accoya® Grey).
In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level).
As it silvers over time, it retains a light shade, which makes it particularly suitable for pool surrounds.
Use class according to EN 335 : 4
Durability class according to NF EN 350 : 1
Guaranteed for 50 years*
*See sales warranty conditions
PIN RADIATA
WARRANTY
UPON INSTALLATION
36 MONTHS
45 MONTHS
Coming from the radiata pine, Accoya® is our wood variety that is particularly stable and very durable.
It is available in two finishes: natural and grey dyed in bulk (in Accoya®).
In terms of eco-responsibility, this wood variety benefits from the acclaimed “Cradle to Cradle” certification (Gold level).
Use class according to EN 335 : 4
Durability class according to NF EN 350 : 1
Guaranteed for 50 years*
*See sales warranty conditions
PIN RADIATA
WARRANTY
The Accoya® Marugame is a special finish that is in keeping with the Japanese Shou Sugi Ban movement.
Also known as Yakisugi, this is a wood burning technique which involves treating the upper side of a board of wood by combustion in order to improve its durability.
This technique, which is as old as time, has considerable advantages in terms of wood sustainability and maintenance.
Carbonisation will indeed offer protection against wood mould or oxygenation, that makes the wood durable over time. In addition, the carbonised
layer will be more effective against reactions to flames and against insects.
• Planed section with 30° edges in the SILVA S range
• Planed section with square edges in the ANTA S range
Use class according to EN 335 : 4
Use class according to EN 335 : 1
Guaranteed for 50 years*
*See sales warranty conditions
SCOTS
WARRANTY
UPON INSTALLATION
1 YEAR
2 YEARS
Resulting from an innovative furfurylation process, Kebony® is made out of radiata pine which has been treated with a liquid additive made with plant-based ingredients This makes it very durable and highly stable.
This variety has very few knots guaranteeing a flawless look. Over the months and depending on the conditions of exposure, it will take on a grey shade which will silver more and more to give your cladding an uncompromisingly modern look.
• Planed section with 30° edges in the SILVA S range
• Planed section with square edges in the ANTA S range
Use class according to EN 335 : 4
Durability class according to NF EN 350 : 1
Guaranteed for 30 years*
*See sales warranty conditions
SCOTS RADIATA
WARRANTY
UPON INSTALLATION
6 MONTH
2 YEARS
With its chocolate colour, MOSO® Bamboo X-treme® is refined, knot-free and has a visible grain.
The MOSO® Bamboo X-treme® boards are made from bamboo slats that are heat-treated at 200°C and then compressed at a very high density.
This two-stage process increases its hardness and stability for a durable outdoor installation.
Use class according to EN 335 : 4
Durability class according to NF EN 350 : 1
Guaranteed for 25 years*
*See sales warranty conditions
BAMBOU MOSO® X-TREME®
WARRANTY
UPON INSTALLATION
6 MONTH
2 YEARS
Over time, a very beautiful and homogeneous silver patina will emerge.
• Planed section with 30° edges in the SILVA S range
• Planed section with square edges in the ANTA S range
Use class according to EN 335 : 4
Durability class according to NF EN 350 : 1
Guaranteed for 25 years*
*See sales warranty conditions
Partner Thermory®
Sample request
SCOTS RADIATA
WARRANTY
UPON INSTALLATION
6 MONTHS
1 YEAR
Thermoash is a wood variety with very few knots, that is thermally modified at 215°C to increase its stability, durability and rot-proof.
Over time with exposure to UV light it will develop a very beautiful silver patina.
• Planed section with 30° edges in the SILVA S range
• Planed section with square edges in the ANTA S range
Use class according to EN 335 : 3
Durability class according to NF EN 350 : 1
Guaranteed for 20 years*
*See sales warranty conditions
Partners Thermory®, Listone Giordano®, Novawood®, LDC Wood®
Sample request
ASH
WARRANTY
UPON INSTALLATION
6 MONTHS
2 YEARS
Thermospruce is a honey-coloured wood variety that has 2 to 6 knots per linear metre.
It uses a heat treatment at 215°C which combines water vapour and heat in order to permanently modify the internal structure of the wood. The durability and stability of the material are greatly improved.
It is available in two finishes: brown and grey.
• Planed section with 30° edges in the SILVA S range
• Planed section with square edges in the ANTA S range
• Square section
Use class according to EN 335 : 3
Durability class according to NF EN 350 : 1
Guaranteed for 15 years*
*See sales warranty conditions
Partner Thermory®
Sample request
SPRUCE
WARRANTY
Aluminium has many advantages. It is a material that is extremely durable and stable material over time.
It is also very lightweight and resistant to challenging environments.
It comes in a number of impressive colour shades.
Accessories
Connector between two rails to ensure the correct spacing (centre-to-centre distance) between the different elements (rails, clips, boards).
The Clip Grip prevents the board from moving lengthwise using teeth that penetrate the wood. In this way, they will stay straight and aligned. The Clip Grip must be used for all types of wooden boards to prevent any slippage. It is compatible with all the rails.
Steel dismantling keys for dismantling (unclipping) the boards of the rail. Working in pairs, simply slide the keys between the rail and the clips to take the elements apart. This way, a board, that has been damaged for example, can be quickly and easily replaced without interrupting the functioning of the system.
Aluminium receiving part for fixing the finishing sections: drip edge and stop section.
Finishing section that eliminates runoff water.
Finishing section made of aluminium that is ideal for finishing the surrounds of the facade openings.
Aluminium bracket suitable for receiving corner finishing sections.
Easy to fit using the corner brackets, this aluminium section will provide a perfect and modern finish to the corners of the facade.
OUR CLADDING PROJECTS
