The reinforcement solution for boards in specific areas
- Reinforces the support and fastening of a deck board
- Used when the board is ripped or in a specific configuration
- Acts as a complement to the system's clips and Half Clips
- Ensures reliable hold even at the edge of the board
- Quick installation of clips on the rail
- Easily positionable by hand
- Compatible with all Grad rails
Technical specifications
The Wedge clip is designed to reinforce the support of deck boards in specific situations, particularly after ripping or when the use of a standard clip or Half Clip is no longer possible. It ensures optimal board retention thanks to an integrated screwing system, while maintaining the continuity of the installation system.
| Material | Polyoxymethylene (POM) |
|---|---|
| Weight | 8.72 g |
| Melting temperature | 190-220°C |
| Packaging | 25 pieces / carton |
Le produit sous tous ses angles
Superior performance
Improves the support and hold of boards in sensitive areas
Innovative
Integrated screwing system for optimal fastening
Versatility
Allows installation to continue even in case of technical constraints (ripping, absence of grooves)
Instructions for use
When installing your deck, you may need to cut a board lengthwise to achieve the correct width for a door threshold, for example.
If you cut the board in this direction, it is likely that only one groove will be available, leaving the rest of the board unsupported.
To position a Wedge clip, a minimum space of 34 mm between the edge of the rail and the removable clip is required so that the Wedge clip rests fully on the rail.
To secure the board, we recommend drilling a 6 mm diameter hole in the board to allow for the passage of a TF 5/50 self-drilling screw.
To do this, align the drilled hole with the oblong hole in the center of the clip. This is designed for this purpose, which will prevent damage to the Wedge clip.