Support rail for fixing deck boards, cladding, soffits and ceilings
- Maximum free span up to 380 mm depending on the configuration. Consult DTU 51.4 and the profile's technical sheet for determining permissible spacing.
- Up to 1.35m between facade fixings*
- Industrially pre-clipped profile for perfect vanishing lines
- Possibility to individually remove each board using special keys adapted to the board width
- No contact between boards and aluminum rail, for better air circulation
- Invisible fixing
- Simplicity, speed and ease of installation
- Infinite possibilities of use
- Rail can be cut to length
- 100% recyclable
- * (according to current regulations and calculation notes)
Technical specifications
The PR24 rail is a support rail allowing the creation of low-height structures. It can be laid directly on the ground or on Top Lift pedestals.
Suitable for both terraces and cladding, soffit, and ceiling applications, it constitutes a structural element facilitating the increase of facade fixing spacing. It allows the implementation of coverings with a controlled final thickness, the rail + board complex not exceeding 50 mm (with a 20 mm board), and is particularly suitable, with up to 1.35m between fixings, for projects with thin external insulation.
| Rail material | Aluminium 6060 |
|---|---|
| Rail finish | Black paint |
| Clip material | Polyoxymethylene (POM) |
| Rail weight (with clips) | +/- 1.07 kg/lm |
| Max. length | 3968 mm |
| Clip pull-out resistance on the rail | from 150 to 250 kg, for 2 fixing points (depending on the nature of the covering) |
The product from every angle
Durable
Designed for high resistance, our rails maintain their integrity for many years.
Recyclable
Aluminum composed of at least 80% recycled materials.
Made in France
Our aluminum rails are manufactured in France and assembled in our factory in Alsace.
Instructions for use
The PR24 in pictures
