Non-load-bearing rail for fixing deck boards, cladding, soffits, interior and ceiling
- Non-load-bearing rail to be fixed on hard ground or continuous support
- Low thickness
- Industrially pre-clipped profile for perfect vanishing lines
- Possibility to individually dismantle each board using special keys adapted to the board width
- Rail can be cut to length
- No contact between boards and aluminum rail, for better air circulation
- Invisible fastening
- Simple, fast and comfortable installation
- Infinite possibilities of use
- 100% recyclable
Technical specifications
For decking, it is a non-load-bearing rail designed to be laid directly on the ground or screwed onto a structure for raised installation. The possible finished heights with this type of structure are between 39 and 47mm.
The Flat rail can be used for exterior cladding for invisible board fastening, offering an aesthetic finish without visible screws. It allows for the precise and regular installation of wood coverings, while ensuring efficient ventilation of the facade. Suitable for boards approximately 20 mm thick, it integrates into cladding configurations reaching up to 38 mm total thickness, guaranteeing durability, stability, and quick installation on site.
The Flat rail is also suitable for soffit, ceiling, and interior wall covering installation, allowing for aesthetic continuity of arrangements.
| Rail material | Aluminum 6060 |
|---|---|
| Rail finish | Black paint |
| Clip material | Polyoxymethylene (POM) |
| Rail weight (with clips) | +/- 0.630 kg/ml |
| Max. length | 3968 mm |
| Clip pull-out resistance on the rail | from 150 to 250 kg, for 2 fastening points (depending on the nature of the covering) |
The product from all angles
Durable
Designed for high resistance, our rails maintain their integrity for many years.
Recyclable
Aluminum composed of at least 80% recycled materials.
Made in France
Our aluminum rails are manufactured in France and assembled in our factory in Alsace.
Instructions for use
The Flat rail in pictures
